Heating

Understanding Underfloor Heating.

An overview of commonly used underfloor heating types.

General 3 minute read Updated 3 November 2026

Underfloor Heating (UFH) is a form of heating used to provide heat to a property from below the final floor finish. There are two main types of UFH: Electric and Wet.

Why Underfloor Heating Works Slower Than Other Heating Systems

Underfloor heating systems operate at lower flow temperatures than standard radiators, typically between 35–55°C compared to 65–80°C for conventional radiators. Because the heat is distributed across a much larger surface area (the entire floor), the system takes longer to reach the desired temperature. However, once up to temperature, UFH is highly efficient at maintaining consistent warmth, resulting in a more even and comfortable heat distribution throughout the room.

Electric Underfloor Heating

Electric UFH systems are used solely for heating purposes. They are made up of flexible, non-corrosive heating elements, including cables, preformed cable mats, carbon films, and bronze mesh. These elements are installed beneath the floor and heat up when electricity is passed through them.

Installation and Commissioning

Electric UFH uses fewer components than Wet UFH, making it quicker and simpler to install and commission, no pipework, manifolds, or specialist plumbing is required. The heating elements are laid out on the subfloor, connected to a compatible thermostat and power supply, and then covered with the final floor finish. This makes electric UFH an especially practical choice for retrofit installations.

Leveraging Time of Use Tariffs

Electric underfloor heating systems can take advantage of time-of-use (ToU) energy tariffs, such as Economy 7 or Agile Octopus, by pre-heating during off-peak hours when electricity costs are lower. The system’s thermal mass then retains and maintains that heat throughout the day, reducing the need to run the system during more expensive peak periods and providing a cost-effective heating solution.

Wet Underfloor Heating

Also known as Hydronic UFH, wet underfloor heating can be used for both heating and cooling purposes. It works by circulating a mixture of warm water and antifreeze through a network of polyethylene-based pipes embedded beneath the floor. Wet UFH is typically the preferred choice for whole-home or new-build installations due to its efficiency at scale.

How it Works

The UFH pipes are laid out in a closed-loop system, connected via a central manifold and pump. A heat source such as a boiler, air source heat pump, or solar thermal is used to provide warm water to the UFH pipes.

Benefits of Wet Systems

Wet UFH systems are highly efficient and can be more cost-effective to run than electric systems, especially in larger areas. They can also be integrated with renewable energy sources, making them an environmentally friendly option.

Was this article helpful?

Still need help?

Use our live chat or create a ticket and a member of our support team will be in touch.

Create a ticket

Tell us what is happening and a member of our support team will be in touch.

Loading the form